Beaded Pendant DIY from Marcie Abney Carroll

This tutorial is simple, even-if-you're-not-a-beadweaver simple, says Marcie. You have below all the detailed steps, pictures and even cross-section illustrations, so you can also do it easily.

The pendant is unique and interesting, and you can make the whole thing for about $10 and an hour of your time.

Here's what you'll need:
  • MissFickleMedia oval connector (you could also use her round links)
  • Size 8 Matte Gun Metal Japanese Seed Beads (A)
  • Size 11 Japanese Seed Beads Metallic Iris Purple (B)
  • Size 8 Raku Plum/Teal Iris Japanese Seed Beads (C)
  • Size 11 Matte Pewter Japanese Seed Beads (D)
  • Size 15 Silver-Lined Dark Teal Japanese Seed Beads (E)
  • Wildfire beading thread (or Fireline, but do not use nymo)
  • Size 12 beading needle
  • one jump ring (any size)
  • chain of any color and size that you'd like

You can change colors and use the ones you like.

Here's how you'll do it:

1. Cut a length of thread 5' in length and tie the thread onto the oval connector using a double knot and leaving a 6" tail.



2. String 1A, 1B, 1A.
* Pass your needle through the connector from the back and up through the second A bead that you added. This will form a loop around the metal connector, and hook the second A to the metal edge. Pull tight so that the size 11 beads pops up between the two size 8 beads.


3. String 1B and 1A and complete step 2 from the * above.
Complete step 3 until you have gone completely around the metal connector. You'll be working in a clockwise direction.



4. When you come to the end, string just 1B, pass down through the first A that you added in Step 2. Loop your thread around the metal connector and come back up through that same A. Pull tight.



5. Pass back through the B that you just added. String 1C and pass through the next B. Continue in this manner working around the connector (flip it over so you're not working in a counter-clockwise direction.) After you add the last C, pass through the B and the first C that you added.

Tip: Try to use "fatter" beads in the curves where the gaps between size B beads are larger and skinnier beads along the edges where the gaps are smaller.



6. If you are in a curve of the pendant, add 2D (choose slimmer beads) and pass through the next C. If you are along one of the edges of the pendant, string only 1D. Continue around the pendant in this manner, adding 2D along the curves of the pendant where the gaps are larger, and 1D along the edges where the gaps are slimmer. When you come to the end, pass through the C and the first D that you added in this round.

Tip: You'll have to be very intuitive. If the bead feels like it's sitting too tight in the gap, take it out and choose a slimmer bead. 



7. String 2E and pass through the next D (or 2D if you're in a curve). Continue in this manner around the pendant until you have completed the last outside row and pass through the 2D.



8. Pass your needle through the beadwork until you have exited from 2E that are sitting at the top of the pendant. String 5B and pass through the next 2E. This will create a loop on top of the pendant that you'll string your jump ring on.

Pass your needle into the beadwork, knot the thread around some of the threads in the beadwork. Do this two or three times with the working thread and the tail thread. Trim the excess. 



And you're done! 
String your pendant on some chain. You can wear it high or low, or even attach a little charm in the center.
Try making it in different colors. Try using one of Shannon's round links instead of the oval. (The upside to the round link? Because there are no sharp curves, the beading will be much more even, no adding two beads instead of one.)


Source:  Marcie Abney Carroll blog labellajoya.blogspot.com

No comments:

Post a Comment

Notes From Fabulouls People - Add Yours Here:

LinkWithin

Related Posts Plugin for WordPress, Blogger...